Delivery and installation Prophilactor Evminova

There is nothing easier than installing the Prophilactor Evminova yourself!

To do this, you will need:

1.Hammer Drill (for concrete/brick) or drill for wood.

2.graphite-coated drill bit for concrete / brick with a diameter of 12 mm.

For wood, you need to use an 8 mm drill bit.

Dowel 12x80 mm. and the anchor hook comes complete with an Evminov preventor and a Glisson loop.

Installation of the simulator is carried out on one mount-a hook, previously mounted in a vertical surface for 3-10 CM., above the top point of the preventor near the wall.

If you can't handle it yourself, please call us: our experience in installing Evminov Preventors allows you to attach the simulator to almost any wall and not only.

We will deliver, install and configure the Evminov back and neck preventor simulator at your home, office or gym.

Delivery and installation \ or only installation of the Evminov preventor in Odessa - 625 UAH.

We suggest installing the original protective panel for the Evminov preventor on the wall, made of the same materials as the preventor itself (dark pine / light pine).

The standard price is 3500 UAH.

The price of a wide or collapsible one is 3650 UAH.

Recommendation for installing the Evminov preventor in a small apartment or

if there is no free wall for attaching the simulator:

Since our apartments do not always have a free wall for the simulator, it is very convenient to use the option of attaching the preventor above the doorway (above the door).

When you work out, the simulator is located in the aisle, which is always free, and after classes you take it out the door in any direction. The length of the cable is 2 meters, which allows you to move the simulator far enough away from the attachment point.

It is not recommended to install the preventor on the balcony (even glazed), in basements and in close proximity to heating devices.